Welcome to Safe Home Technologies

DynaVision Surveillance Systems
KD-105 Speed Dome with Controller

DYNAVISION surveillance Systems creates a new model of surveillance for personal safety and home security. Even integrating advanced speed dome camera with digital video recording Systems, DYNAVISION surveillance Systems is still simply easy for installation and operation. Its user-DIY feature greatly helps to secure your home without complex installation and expensive cost.

DYNAVISION surveillance Systems successfully combines software and hardware between itself with personal computer. Plug-and-use feature makes Systems installation and operation really friendly to users. With its advanced high-speed surveillance dome camera, 360¢X manual surveying is allowed, 8 preset/area titles and 8 programmable presets are also available. DYNAVISION surveillance Systems supports up to 4 cameras, transferring video signal to personal computer through USB interface, creating a network surveillance Systems with features of surveying, recording and replaying. Users can conduct remote surveillance by running attached software or IE explorer through Internet; they can also secure privacies by setting and changing passwords from time to time. With an ADSL line, calling to fix IP, dynamic IP or DHCP IP, DYNAVISION surveillance Systems always brings you a friendly and safe environment.

KP-104 Dome Camera Controller

Features & Functions

1. Connect and control up to 4 sets of KD & AD serious cameras
2. Totally control & setting to KD & AD serious cameras, including
choice of selected camera video output
adding, changing & deleting presets
choice of cameras dwell time under sequential mode
initiated camera auto-cruise between prersets
3. Joystick for camera moving
4. 8 presets for KD & AD serious cameras
5. Initiated KD & AD serious cameras auto cruise
6. RS-485 control format
7. RJ-45 plug, (single cable), easy to install and maintain
8. RCA video outputs, to quad device for 4-video display
9. Alarm input and output
10. RS-232 control signals input
11. LCD display for easy usage

Product Spces

Control cameras: 4 KD or AD serious cameras
Connectivity: RJ-45 plug (video, power, control signals), Cat-5 cable
Alarm output: 3 pin NC/NO
Presets: 1 ~ 8
Control signals: one set RS-232 input, RS-485 to camera
Transmitting range: 50 meters to DC12V, extend-able to 150m, control signals & video
Camera ID Set up: 1 ~ 4 internal DIP switch
Video input: from RJ-45 plug
Video output: RCA plugs(4 sets) to 4 sets RJ-45 plug
Output impedance: 75 ohm
UI display: LCD English or Chinese
Power: Voltage DC 12 V / 1.5 A
Current: 400-1.2A, depends on number of cameras
Dimension: W x D x H 275 x 114 x 44 mm
Weight: 435 gm

Accessories

Power supply: Output DC 12 V / 1.5 A, input AC 100 ~ 240V, 50 - 60 HZ
Connectivity: 9 PIN RS-232 plug TO 4 PIN RS-485 plug

Peripherals

Cameras: KD & AD serious cameras
CX-10 : RJ-45 TO RJ-45+POWER plug
(extend transmitting length of KD & AD serious cameras to 150m)
CX-11 : RJ-45 TO BNC+POWER plug
(compatible with coaxial cable cameras)

Home l About Us l Services l References l Contact Us